Wood and Metal

Milwaukee 21/64" Bit Drill Cobalt Rod, 48-89-2318

Milwaukee Thunderbolt Cobalt drill bits are designed for extreme durability and long life in specialty applications. The Thunderbolt web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage...

MILWAUKEE 13mm Metric Titanium SHOCKWAVE Drill Bit (48-89-4829)

Milwaukee SHOCKWAVE Impact duty titanium drill bits with RED HELIX are engineered for impacts and drills. Designed with a variable helix with an aggressive 35° helix angle which ends at 15°, the impact duty titanium drill bits with RED HELIX provide...

25-Pack Milwaukee 48-32-4122 Shockwave 1" Impact Square Recess Insert Bits, #2

The Milwaukee SHOCKWAVE Impact Duty square recess insert bit is easy to use. To ensure proper compatibility, be sure to verify the proper drive size. This square recess insert bit has a #2 drive. This square recess insert bit is made of alloy steel with...

Irwin Tools 43908 Plug Cutter 1/2"

"IRWIN INDUSTRIAL TOOL" SHANK PLUG CUTTER * For covering fastener holes * For furniture, cabinetry, floors & decks * Hardened, high-carbon steel * Ideal for making dowels * 1/4" shank size * Recommended for covering fastener holes in woodworking...

IRWIN 3016127 27/4" Cobalt Alloy Steel Drill Bit

Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. Made from industrial grade High-Speed Steel for increased durability. 8% Cobalt alloy is heat and abrasion-resistant. 135-degree split-point tip...

MILWAUKEE 6.5mm Metric Titanium Shockwave - 1 piece - Red Helix (48-89-4815)

The Milwaukee SHOCKWAVE RED HELIX drill bit is easy to use. This product has a 6.5 mm diameter. Designed for right hand cut applications. Has a 2.48 in flute. Comes with a 1/4 in shank. The drill bit has a 135° point for hole making applications. This...

MILWAUKEE 10.5mm Metal Shockwave Titanium Drill Bit - 1 piece - Red Helix 48-89-4824

The Milwaukee SHOCKWAVE RED HELIX drill bit is easy to use. This item has a 10.5 mm diameter. Designed for right hand cut applications. Has a 3.07 in flute. Comes with a 1/4 in shank. The drill bit has a 135° point for hole making applications. This...

Bosch FB016 Forstner Bit, 1"

Bosch forstner bits bore perfectly smooth, flat-bottomed holes in wood. Holes are precise, flat and splinter-free even in end grain and knots. Ideal for drilling decorative holes used in fine woodworking and especially well-suited for severe angles and...

Irwin 42920 1-1/4-Inch by 3/8-Inch Shank Forstner Bit

Bores perfectly smooth, flat bottomed holes. More accurate holes at any angle. Use for boring overlapping holes or pocket holes. Starts the bit cleanly, even or uneven surfaces. Reduced shank fits 3 8" and larger drills and drill presses. No. 42904: 1...

12-Piece ITM 13/64" Jobber Drill Bit 135° Split Point HSS Black Oxide

12-Piece ITM 206SP1464 7/32" Jobber Drill Bits 135° Split Point HSS Black Oxide

5-Pack Makita T-05119 Impact XPS #2 Phillips 2" Power Bit

PERFORMANCE : Engineered to withstand the extreme power of high-torque Impact DriversDURABILITY : Lasts up to 100X longer than standard impact bitsEFFICIENCY : Precision machined tips with a superior full contact fit for improved holding power and longer...

Irwin 3016131 31/64" Cobalt Drill Bit 135 Degree Split Point

Ensures you achieve a precise fit essential when repairing damaged and worn threads or creating new tools from raw steel. High-carbon steel dies are durable for long life where high accuracy and tolerance is not critical, especially important with hand...

Lenox 1787605 Bi-Metal Self Feed Set Screw (5 Piece)

This Lenox 1787603 is a 5-piece Self-Feed Lead Screw. Its aggressive tip makes the removal of the tool easier after the drilling. This replacement screw is used for bimetal self-feed bits. Lenox continues to provide reliable replacement like this one for...

Irwin Speedbor, 15/32" Titanium Coated Drill Bit (3015030)

Speedbor, 15/32", titanium coated drill bit, with 3/8" reduced shank to fit in all 3/8" drills, lasts up to 10 times longer than standard HSS drill bits, 140 degree split point for less walking & quicker starts, cutting edge stays sharper longer...

6-Piece ITM 300-ST-06 Spade Wood Boring Drill Bit Set

Spade Wood Drill Bits, also known as Wood boring Drill Bits or Paddle Bits, are used to bore holes into wood using the center point as a guide and the cutting wing tips to bore the hole into the wood. Spade Bits in this selection are cold forged and...

Irwin Speedbor 1866065 Wire Pulling Tri-Flute Bit, 16" x 1-3/8"

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed, as well as three (3) cutting spurs for faster, cleaner holes, less breakout and extended drilling life...

IRWIN Speedbor 1866063 Wire Pulling Tri-Flute Bit, 16" x 1-1/8"

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed, as well as three (3) cutting spurs for faster, cleaner holes, less breakout and extended drilling life...

Irwin Speedbor 1866064 Wire Pulling Tri-Flute Bit, 16" x 1-1/4"

The IRWIN SPEEDBOR Max Speed wood drilling bit is the FASTEST SPEEDBOR EVER. The Speed Tip features a full screw-point that allows bit to self-feed, as well as three (3) cutting spurs for faster, cleaner holes, less breakout and extended drilling life...

MILWAUKEE Linemans 11/16 in. x 18 in. Impact Auger Bit Shockwave 48-13-6705

The Shockwave Lineman's Impact Auger Bits are engineered to deliver cleaner, faster holes in wooden utility poles. They feature a single spur design, which scores the edge of the hole, creating a cleaner finish that allows bolts to slide through without...

BluMol Extreme 7pc Black Oxide Drill Bit Set (7000)

Blu-Mol Xtreme 7pc Black Oxide Drill Bit Split Point. Disston offers a variety of drilling and wood boring bits designed to meet your many DIY and professional drilling needs. When industrial-grade cutting is needed, Blu-Mol Xtreme is the choice of...

Irwin 1765139 Speedbor Max Durability 1" Bi-Metal Tri-Flute Bit

Irwin 1765139 Speedbor Max Durability 1" Bi-Metal Tri-Flute Bit

Milwaukee 48-13-5560 Wood Drilling 9/16" x 18" Ship Auger Drill Bit

9/16" Ship Auger Bit and 18" Long Milwaukee ship auger bits have a new through center cutting design for improved life in nail-embedded wood. The flutes are coated, which produces a non-stick surface for fast and smooth chip ejection, especially in deep...

Milwaukee 48-13-6120 Wood Drilling 1-1/8" x 18" Ship Auger Drill Bit

Milwaukee's precision machined 1-1/8 inch Ship Auger Bit provides smooth, wobble free deep hole boring. The wide throat design gives excellent chip clearance. The self feeding screwpoint and single cutting edge result in fast rough boring in wood. A...