CMT®

CMT 537.476.31 Forstner Bit, 1-7/8" Diameter, 3/8" Shank

CMT 537.540.31 Forstner Bit, 2-1/8-Inch Diameter, 3/8-Inch Shank

Forstner bit featuring special alloyed steel body, precision balanced center point, 2 spurs, 2 precision ground cutting edges for long-lasting cutting performance. Use to drill precise flat bottom...

CMT 550-102 Multipurpose Hole Saw, 4"

CMT 550-HS2XL MUTI PURPOSE Center Drill Spare Part Holder 1-1/4" - 13"

CMT 550.HS2XL Spare part holder D=14 to 30mm S=9,8mm RH, L=320 KW=HSS

CMT 550-HW1 Carbide Tipped Center Drill with 5/16" Shank for Multipurpose Hole Saws

Center drill with 5/16-Inch hexagonal shank, suitable to fit hole saws featuring a diameter from 25/32 to 1-3/16-Inch. Drill is easily fastened into the hole saw and is easily removed thanks. No...

CMT 551-029 Bimetal Plus Hole Saw, 1-1/8"

CMT 552-012 Diamond Dry Hole Saw with 15/32" Diameter

Diamond grit edge hole saws have been specially developed for professionals that need to drill in extremely hard materials where it is increasingly difficult to drill with conventional hole saws...

CMT 791.003.00 Bearing, 1/2-Inch Diameter, 3/16-Inch Smaller Diameter

Top-quality steel bearing for router bits. This features 1/2-Inch diameter, 3/16-Inch smaller diameter and 5mm thickness. For assembly, make sure the keep the shield right side up to correspond with...

CMT 791.004.00 Bearing, 3/4-Inch Diameter, 1/4-Inch Smaller Diameter

Top-quality steel bearing for router bits. This features 3/4-Inch diameter, 1/4-Inch smaller diameter and 7mm thickness. For assembly, make sure the keep the shield right side up to correspond with...

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 811.032.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 1/8-Inch Diameter

CMT 811.065.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 1/4-Inch Diameter for Incra Jigs

CMT 811.081.11, Solid Carbide Straight Bit, 1/4-Inch Shank, 5/16-Inch Diameter for Leigh Jig

CMT 811.182.11 Straight Bit, 1/4-Inch Shank, 23/32-Inch Diameter for ply-groove

CMT 811.623.11 Straight Bit, 1/2-Inch Shank, 31/64-Inch Diameter

CMT 812.158.11, Straight Bit, 1/4-Inch Shank, 5/8-Inch Diameter

This straight bit features long cutting length and overall length. It can withstand even the heaviest work load and still give you a smooth, precise cut every time. They also provide exceptional chip...

CMT 814.064.11 Round Nose Bit, 1/4-Inch Shank, 1/4-Inch Radius, Carbide-Tipped

CMT 814.160.11 Round Nose Bit, 5/16-Inch Radius, 1/4-Inch Shank